The G10 is a passive high power line source element – acoustically optimized to reach an excellent sound quality and extraordinary performance. Particular attention was paid to the practical handling to ensure ideal transport characteristics as well as a quick and safe rigging.
| Application | High power line array element, 2 way passive |
|---|---|
| Components | 2 x 10" neodymium loudspeaker (2.5" voice coil) with acoustic filters, 3 x 1" neodymium compression drivers with 2” voice coil and wave guide |
| Dispersion (h x v) | 90° x 6° (verticaly depending on the array length and konfiguration) |
| Nominal load (AES / program) | 800 / 1600 W |
| Impedance | 8 ohms |
| SPL nom. (Fullspace@1W/1m) / max. SPL (at AES nominal load) | 141 dB |
| Frequency range (-3 dB) | 60 Hz - 20 kHz |
| Dimensions (W x H x D) | 720 x 340 x 500 mm |
| Weight | 43 |
| Connectors | rear connector panel with 2x Speakon NL 4 |
| Finishing | PU coating black, humidity resistant |
| Rigging system | PreSelect – 3-point-rigging system which allows to preselect the curving angle (0°–6°) High-strength steel alloy with anti-corrosion coating |
| Special features | 2 x side handles, 2 x corner handles in the back, info panel |
| Protective grille | Steel front grille with anti-corrosion coating and acoustic foam |
| Protection class | IP 45 |
| Simulation software | EASE Focus 3.0 |
| Flying frame | TB 1000 for up to 8 elements, TB 2000 for up to 20 elements |
